1 / 5
Securing Bracket
When purchased separately it is bundled with your RaptorX D1. Arrives in the same box.
About the mount.
Your lock goes where you go.
The RaptorX D1 Carbon Fibre Bracket gives your smart disc lock a permanent home on your motorcycle. No bag, no pocket, no excuses. It rides with you and is ready the moment you park.
Each bracket is printed in carbon fibre reinforced nylon, then annealed for added strength and toughness. The result is stiff, light and built to handle heat, vibration and British weather.
Choose the mount that suits your bike.
Vertical Foot Peg Bracket
Bolts straight into the frame at your foot peg mount, using your bike’s original bolts. No clamps, no drilling, no modifications. Supplied with carbon black washers for M6 bolts and rubber pads to dampen vibration.
Bolt sizes vary between bikes. If yours is not M6, you will need washers to match.
Horizontal Clamp Bracket
Mounts anywhere on your bike that can take two bolts through. The clamp is made from engineering-grade hard plastic with a rubber backing that cushions contact and keeps the clamp tight on the move.
Key features
- Designed for the RaptorX D1 smart disc lock
- Carbon fibre reinforced nylon, annealed for toughness
- Two mounting options: foot peg or clamp
- Rubber dampening to reduce vibration and rattle
- Fits a wide range of motorcycles
In the box
Foot Peg Bracket: bracket, carbon black M6 washers, rubber dampening pads.
Clamp Bracket: bracket, hard plastic clamp with rubber backing, 2 bolts and 2 washers.
Fitting
Check your bike’s foot peg bolt size before ordering the Foot Peg Bracket. For the Clamp Bracket, choose a mounting point that can take two bolts through and keeps the lock clear of moving parts, exhaust and controls.
Carbon fibre infused nylon. Annealed.
Every bracket is made from nylon infused with carbon fibre, then annealed for extra strength and toughness.
More design variations are on the way to suit different bikes and riding styles. Not sure which mount is right for you? Get in touch and we will help.
Foot peg or clamp. Your call.
Vertical Foot Peg Bracket. Bolts into the frame at your foot peg mount using your bike’s original bolts. No clamps, no drilling, no modifications.
Horizontal Clamp Bracket. Mounts anywhere that can take two bolts through. A hard plastic clamp with rubber backing keeps it tight on the move.
From bracket to disc in seconds.
Snap the RaptorX D1 to your bike on the move.
Carry
Rides on the bracket — rattle-free.
Stop & Lock
Pull free, drop through your disc, walk away.
Snap Back
Snap the lock back into the bracket. Ride.
Specifications
Material
- Bracket: carbon fibre reinforced nylon, annealed
- Clamp: engineering-grade hard plastic, rubber backed
Mounting
- Foot peg: uses your bike’s original bolts
- Clamp: any point that takes two bolts
- No drilling or modifications
Environment
- Handles heat and vibration
- Rubber dampening against rattle
- Designed in the UK
In the box
- Foot Peg: bracket, carbon black M6 washers, rubber pads
- Clamp: bracket, rubber-backed clamp, 2 bolts, 2 washers
Will this fit my bike?+
The Foot Peg Bracket bolts into your foot peg mount using your bike’s original bolts and comes with M6 washers, so check your bolt size first. The Clamp Bracket mounts anywhere on your bike that can take two bolts through.
Does it scratch my paint?+
No. Both brackets use rubber pads or a rubber backing where they touch the bike, which cushions contact and dampens vibration.
Can the lock rattle out at speed?+
No. The stiff tight fit design stops any movement of the device once it locks onto the bracket.
Will it survive winter outside?+
Yes. Carbon fibre reinforced nylon, annealed for toughness, is built to handle heat, vibration and British weather.
What's in the box?+
Foot Peg Bracket: bracket, carbon black M6 washers, rubber dampening pads.
Clamp Bracket: bracket, hard plastic clamp with rubber backing, 2 bolts and 2 washers.
